- TypeCement
USES:
Prevents tile cracks, bonding failure and efflorescence
- High adhesive tensile strength
- Non-sag and high initial adhesiveness
- Greater workability due to long pot life and open time
- Applicable in interior and exterior areas
- Higher productivity per worker per day
SURFACE PREPARATION:
The substrate must be fully cured, structurally stable and level, smooth, clean and free from dirt, dust, loose material, oils, chemicals and other contaminants. Acid etch or abrade to ensure proper bonding.
MIXING:
Into a plastic pail containing clean tap water, pour a sufficient quantity of ABC TILE ADHESIVE that may be used within the pot life of 3-4 hrs. 5 kg of ABC TILE ADHESIVE needs approx. 1.5 L of water and 25 kg needs approx. 8 L of water. Stir with a mixing device or by hand. Wait 15 min. and mix again briefly. ABC TILE ADHESIVE is now ready to use. This mix will be usable within 1-2 hrs.
CAUTION: Use only plastic pail or galvanized iron sheet as mixing base. Never use absorbent material such as plywood, wooden box, gypsum board, etc.
SAFETY:
Non-toxic. However, as with any cementitious material, avoid prolonged skin contact.
STORAGE:
Store in a cool dry place. When stored as directed, ABC TILE ADHESIVE will remain usable for a period of one year from date of manufacture.
PACKAGING:
25 kg self-sealing multi-ply paper bag with polyethylene plastic liner
CLEANING:
Remove excess mortar on tile face and on tools using clean water.
COVERAGE:
Dependent on substrate conditions 25 kg of ABC TILE ADHESIVE shall cover approx. 5-7 m2.